Rain Jacket Flashing Kit, 10 to 15 windows
- Fits
- Ten large or fifteen small to medium windows
- Covers
- 250 lineal feet around the perimeter of the windows
$895
Request this kit
Sheet 04 / Catalog
Products
Eight components and one kit. Prices are per part, with case pricing where it applies. We price a kit over the phone, and advice on the job is free.
White windows set in brick
Kits / Everything for the opening
When installed properly the Rain Jacket Flashing System can withstand AAMA window pressure tests greater than 4.5 PSF. By utilizing PVC and high end flexible flashings you can install replacement or new windows in a true water tight and integrated manner without removing or cutting the existing cladding.
Component schedule
Eight parts, and what each one does.
Reference numbers match the Installation Manual and the numbers printed on the drawings, so a callout on a drawing and a row in this table are the same part.
Ref
Component
Specification
Function
21.2
RJ Sill Flashing
.055 PVC, 3" x 1/2"
Directs water away from the bottom of the window opening and out over the building paper, completing the layered waterfall effect of the system.
21.3
RJ Corners
PVC, 3 1/2" x 7"
Form a continuous barrier against water penetration at the critical corner areas.
21.4
RJ Head Flashing
.055 PVC white with receiver, 3" x 1 3/8" x 1/4"
Deflects water from the head of the window.
21.5
RJ Jamb Flashing
.055 PVC, 3" x 1/2"
Directs water away from the sides of the window and integrates to the interior L angle with the microsealant.
21.6
RJ Interior L Angle
.055 PVC white L angle, 3/4" x 1/2"
Creates a back pan and a bridge point for the microsealant, and helps seal the window on the inside.
21.7
RJ Microsealant
Micro sealant adhesive membrane, 60 mil, 50' rolls
Seals and integrates the flashing components to create a 360-degree pan.
21.11
OSI Quad Max Sealant
3/8" bead at the corners, 1/4" at the L angle
Bonds the window to the interior L flashing and creates an exterior sealant bead.
21.14
OSI Teq Foam
Low pressure polyurethane foam
Seals gaps, cracks, holes and voids around windows and patio doors.
OSI Quad Max and OSI Teq Foam are trade supplies and are not sold here. Every other component is below.
Parts and case pricing
RJ Jamb and Sill Flashing
SKU / rjf3-8
Polypropylene flashing, an affordable alternative to metal. Non-corrosive, non-conductive, easy to cut and attach, and cheaper to ship than metal.
each
$6.24
case of 50
$260
RJ PVC Head Flashing with Receiver
SKU / RJH3-8
The patented head flashing incorporates a back leg receiver, which projects water that may be behind the building paper.
each
$16.63
case of 30
$485
RJ Vinyl Corner
Rigid vinyl corner, cut to size, that seals the lower corners of the rough opening under the window. With the RJ Microsealant it forms a pan flashing. Suits vinyl, aluminum, composite and wood windows.
each
$1.86
case of 100
$155
RJ Interior L Angle, white
Non-corrosive, non-conductive, easy to cut and attach, UV resistant white.
each
$4.32
case of 50
$180
RJ Microsealant, 2" x 50'
Pure MicroSealant between two removable protection layers, sticky on both sides. Used as a sill pan and gasket when installing windows with the system. 60 mil, 50' rolls.
roll
$44.95
case of 12
$489.95
RJ Microsealant, 3" x 50'
SKU / ET3-50
The wider roll, for a sill or gasket when installing patio doors, or windows set deep in the framing. 60 mil, 50' rolls.
roll
$66.95
case of 8
$489.95
Warranty
One year on the flashing components.
Tell us the opening count, the cladding and your location, and we will price it. Advice on the opening is free either way.